Double safety structure of valve stem: In order to prevent sudden accidents caused by valve stem damage or flying out due to unknown
reasons, independent valve stem flying prevention mechanisms are designed at the upper and lower ends of the valve stem, which fully
complies with standard API 609 and safety requirements for use.
Two-way sealing elastic valve seat:The valve seat adopts a flexible lip sealing ring elastic structure, which can automatically adjust when the
temperature and pressure change to ensure that the sealing performance of the valve is not affected;This structure can achieve two-way
sealing and meet the standard of no bubble leakage.
Internal travel limit: Minimize the probability of valve seat damage and extend the service life of the valve seat.
Fireproof and anti-static structure (optional):Can Effectively protect the safety of equipment and personnel, reduce the probability of
accidents, and improve the safety factor of the site.
High-strength one-piece valve stem: The high-strength, integral valve stem design ensures effective torque transmission and maintenance of
sealing. At the same time, the valve stem head is standardized and has the characteristic of being able to replace the actuator.
◎ Design standards: API609, ASME B16.34, BS 6364
◎ Main material: low temperature steel, stainless steel, alloy steel, etc.
◎ Size range: NPS6~NPS80/DN150~DN2000
◎ Pressure level: Class150~ Class 300/PN10~PN50
◎ Temperature range: -196℃~120℃
◎ Application scenarios: Liquefied natural gas (LNG) process systems, used for flow regulation and control of system pressure; chemical process
systems, such as refrigerant, liquid oxygen, liquid nitrogen, etc. transportation systems; food processing, such as liquid food delivery systems, etc.
硬密封蝶阀是由我公司新开发的长寿命、节能型蝶阀。它由阀体、蝶板、密封圈、传动机构等主要部件组成。其结构采用二维或三维偏心原理设计，弹性密封或硬软多层次密封兼容的加工新工艺，使蝶阀在运行时，减少其扭矩，达到省力、节能之功效。同时确保蝶阀整体的抗腐蚀、耐高温、抗磨损的可靠性。常用的硬密封蝶阀有对夹式蝶阀、凸耳式蝶阀和法兰式蝶阀。
止回阀又称单向阀或逆止阀，是靠管路中介质本身的流动产生的力而自动开启和关闭的，属于一种自动阀门。止回阀用于管路系统，其主要作用是防止介质倒流、防止泵及其驱动电机机反转，以及容器内介质的泄放。止回阀还可用于给其中的压力可能升至超过主系统压力的辅助系统提供补给的管路上。生产的止回阀有旋启式止回阀和升降式止回阀。
波纹管截止阀也叫波纹管密封截止阀，通过自动滚焊焊接，在流体介质和大气之间形成一个金属屏障，确保阀杆零泄漏的设计。波纹管截止阀内部采用波纹管结构，不锈钢的波纹管下端焊接在阀杆上，以防止工艺流体浸蚀阀杆。另一端置于阀体和阀盖之间构成静密封。采用双重的密封设计若波纹管失效阀杆填料也会避免泄漏，波纹管焊于阀杆保持稳定的运行性能，避免由于阀塞振动引起阀杆振动。最适翻于蒸汽、易燃、易爆、导热油、高纯度、有毒等介质的管路上。